VDL Bus Oil Filter LF16233 1948921 1629393 1643070 LEF5207 P550812 1948921PE

[The role of oil and replacement cycle]

First of all, for the engine oil known as “car blood”, it will deteriorate after long-term use. If it is not replaced in time, it will increase the wear of the engine and even cause damage to the components. Therefore, it is recommended that car owners follow the instructions in the owner’s manual Change the oil in time. Generally speaking, the oil should be changed every 5000-15000 kilometers.
Since the oil has to pass through the oil filter to reach the lubrication part, the function of the oil filter is to filter the impurities of the oil entering the engine system to prevent the impurities (dust, metal chips and oil) from being continuously mixed in the oil during the cycle of use. The colloidal substance formed by oxidation) causes serious consequences such as blockage of the oil passage and even damage to the engine. At present, most cars use disposable filters that cannot be removed and cleaned. Therefore, in general, the oil should be replaced at the same time as the oil is changed every 5000-15000 kilometers to ensure the good lubrication effect of the oil on the engine.

If the oil filter is changed regularly, only clean oil will circulate in the system. This will greatly increase the energy output of the engine and reliably prevent wear.

How to change truck oil filter? How to replace truck oil filter:

1. Warm up the engine, open the engine oil filler cap, lift the vehicle, remove the engine guard plate and unscrew the oil plug, use the oil receiver to release all the old oil in the engine. Spread engine oil evenly on the rubber ring of the new filter for later use;

2. After the oil is completely drained, install the oil drain plug, take out the old machine filter, and then screw the new filter to the machine filter seat freely by hand;

3. Use a torque wrench to tighten the filter according to the torque in the maintenance manual. The filter sealing ring is made of special material, please do not use too much force when tightening, so as not to cause difficulty in disassembly, clean the oil around the filter;

4. Fill the oil, tighten the oil filler cap after adding it, check the oil level, start the engine idling and accelerate for a period of time, check for leaks, stop for a few minutes and then recheck the oil level, if there is no oil leakage, replace it complete.

Contact Us