Oil Separator 9VX14118 for L260G-08W CompAir Screw Compressor

711632E1-202EAU6013-A Oil and Gas Separator Element Product Information:

711632E1-202EAU6013-A Oil and gas separator filter element is made of ultra-fine glass fiber composite filter material from American HV Company and American Lydall Company. The misty oil and gas mixture in the compressed air can be filtered out when passing through the oil separator.

The fine seam welding, spot welding process and the use of two-component adhesive ensure that the oil and gas separation filter element has high mechanical strength and can work normally at a high temperature of 120 °C.

Oil content 3~6ppm

Compressed air oil mist particles can be controlled below 0.1μm

711632E1-202EAU6013-A The service life of oil and gas separator filter element is more than 4000H

Applicable models: Ingersoll Rand, Atlas, Fusheng, CompAir, Liuzhou Fidelity, Berg and other 15HP~50HP models

Product model: 711632E1-202EAU6013-A

The products we sell make the following commitments

1. Oil and gas separator [oil] warranty time is 4000 hours
2. Air filter [air filter] warranty time is more than 2000 hours
3. Oil filter [oil filter] The warranty time is more than 2000 hours

Note: The above warranty time is guaranteed under the condition of your air compressor environment and the good working conditions of the air compressor itself.

Introduction to Air Compressor Oil

Second, air compressor oil classification
At present, air compressor oil (lubricating oil) can be divided into three categories: mineral oil-based air compressor oil, semi-synthetic oil-based air compressor oil and synthetic oil-based air compressor oil

The first air compressor oil use function
Air compressor oil (lubricating oil) mainly plays the role of cooling, lubricating, cleaning, sealing and noise reduction in mechanical products. Not limited to this, a good oil should at least play the following roles

1. Anti-friction and anti-wear, reduce frictional resistance to save energy, reduce wear to prolong mechanical life and improve economic benefits;
2. Cooling, it is required to discharge the friction heat out of the machine at any time;
3. Sealed, requiring anti-leakage, anti-tip, anti-bleeding;
4. Anti-corrosion and anti-rust, it is required to protect the friction surface from oil deterioration or external erosion;
5. Clean and rinse, requiring the friction area to be cleaned and excluded;
6. Stress dispersion buffer, load dispersion and shock mitigation and shock absorption;

Contact Us