Oil filter engine parts lube oil filter LF691A lR-0716

Short Description:

Send email to us

Product Detail

Product Tags

Size

Inner diameter 2: 62mm

Height: 80mm

Seal ring diameter: 72mm

Filter implementation type: Screw-on Filter

Connector thread: 3/4″-16UNF-2B

Shell diameter: 76mm

Starting torque: 20Nm

OEM

BEDFORD : 7884256

BEDFORD : 7965051

BEDFORD : 7973235

BEDFORD : 7973429

BEDFORD : 7984256

COCKSHUTT : EPP4.3P25

DEUTZ : 1163420

FENWICK : 8102165

FORD : 1457512

FORD : 1462805

FORD : 1498014

FORD : 1536304

FORD : 1553370

FORD : 1555370

FORD : 1559937

FORD : 2735E6714B

FORD : 5002530

FORD : 5003329

FORD : 5003331

FORD : 5003914

FORD : 5003929

FORD : 5003930

FORD : 5003968

FORD : 5004926

FORD : 5008678

FORD : 5011780

FORD : 5011782

GMC : 6438162

GMC : 7984256

GMC : 7984326

GMC : 90027778

Cross reference

A.P. : AP1010

A.P. : AP1020

A.P. : AP1193

A.P. : AP63000A

A.P. : AP76201A

A.P. : LK1010

ACDelco : SD

ACDelco : SD3

ACDelco : SE

ACDelco : X15

ACDelco : X20

ALCO FILTER : SP-828

ALCO FILTER : SP-835

ALCO FILTER : SP-864

ALCO FILTER : SP-942

BALDWIN : B1413

BORG & BECK : BFO4077

BOSCH : 0 451 102 056

BOSCH : 0451102901

BOSCH : 0451103110

BOSCH : 0 451 103 272

BOSCH : 0 451 103 312

BOSCH : 0 986 452 023

BOSCH : 9450732010

BOSCH : O133

BOSCH : P2056

CHAMP : PH7017

How to replace the filter element:

1. Replacement of the filter element of the single barrel pre-filter device: a. Close the oil inlet ball valve and open the upper end cover. (Aluminum alloy type upper end cover needs to be opened gently from the side notch with a flat-blade screwdriver); b. Unscrew the drain plug wire to drain off the dirty oil; c. Loosen the fastening nut on the upper end of the filter element, and the operator wears an oil-proof Hold the filter element tightly with gloves, and remove the old filter element vertically; d. Replace with a new filter element, pad the upper seal ring (the lower end has its own seal), and tighten the nut; f. Pay attention to pad the sealing ring) and tighten the bolts. 2. Replacement of the filter element of the dual-barrel parallel pre-filtration device: a. First close the oil inlet valve of the filter on the side of the filter element that needs to be replaced, close the oil outlet valve after a few minutes, then unscrew the end cover bolts, and open the end cover; b. Open the drain The valve completely drains the dirty oil to prevent the dirty oil from entering the clean oil chamber when the filter element is replaced; c. Loosen the fastening nut on the upper end of the filter element, and the operator wears oil-proof gloves to hold the filter element and remove the old filter element vertically; c. Replace with a new filter element, pad the upper seal ring (the lower end has its own seal), tighten the nut; d. Close the drain valve, cover the upper end cover (pay attention to the seal ring), and install the fastening bolts. E. Open the oil inlet valve first, then open the exhaust valve. When the exhaust valve discharges oil, immediately close the exhaust valve, and then open the oil outlet valve; then operate the filter on the other side in the same way.