Manufacturer High Quality AH1135 for Generator engine parts air filter OEM ODM Customized

product information
Outer Diameter : 343mm
Height : 655mm
Inner diameter : 172mm
Filter Implementation Type : Filter Insert
OEM
CUMMINS : 3099012
Reference No
BALDWIN : PA2724
DONALDSON : P524838
FLEETGUARD : AH1135
FLEETGUARD : AH1135M
FRAM: CA6623
HENGST FILTER : E1491L
LUBERFINER : LAF8003
WIX FILTERS : 46851
Air filter is short for air filter
The engine needs to suck in a lot of air during the working process. If the air is not filtered, the dust suspended in the air will be sucked into the cylinder, which will accelerate the wear of the piston group and the cylinder. Larger particles entering between the piston and the cylinder can cause serious “pulling the cylinder”, which is especially serious in dry and sandy working environments. The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand in the air, ensuring that sufficient and clean air enters the cylinder
According to the filtration principle, air filters can be divided into filter type, centrifugal type, oil bath type and composite type.
1. During installation, whether flange, rubber pipe or direct connection is used between the air filter and the engine intake pipe, they must be tight and reliable to prevent air leakage. Rubber gaskets must be installed on both ends of the filter element; The wing nut of the cover should not be over-tightened to avoid crushing the paper filter element.
2. During maintenance, the paper filter element must not be cleaned in oil, otherwise the paper filter element will fail, and it is easy to cause a speeding accident. During maintenance, only the vibration method, the soft brush removal method (to brush along the wrinkle) or the compressed air blowback method can only be used to remove the dust and dirt attached to the surface of the paper filter element. For the coarse filter part, the dust in the dust collecting part, the blades and the cyclone pipe should be removed in time. Even if it can be carefully maintained every time, the paper filter element cannot fully restore its original performance, and its air intake resistance will increase. Therefore, generally, when the paper filter element needs to be maintained for the fourth time, it should be replaced with a new filter element. If the paper filter element is cracked, perforated, or the filter paper and end cap are degummed, they should be replaced immediately.
3. When using, it is necessary to strictly prevent the paper core air filter from being wet by rain, because once the paper core absorbs a lot of water, it will greatly increase the air intake resistance and shorten the mission. In addition, the paper core air filter must not come into contact with oil and fire.
4. Some vehicle engines are equipped with a cyclone air filter. The plastic cover at the end of the paper filter element is a shroud. The blades on the cover make the air rotate, and 80% of the dust is separated under the action of centrifugal force and collected in the dust collector. The dust reaching the paper filter element is 20% of the inhaled dust, and the total filtration efficiency is about 99.7%. Therefore, when maintaining the cyclone air filter, be careful not to miss the plastic shroud on the filter element.