High quality factory HOT sale powercore air filter 2355128 235-5128 TA9582 CA2355128 for Scania truck

Why do we need to maintain the air filter element?

The correct maintenance of the air filter element can ensure that the air filter element is not damaged by dust to the greatest extent, and the correct maintenance can increase the service life and use effect of the air filter element, thereby helping users save time and money.

There are two common problems in the maintenance process:

One is the excessive maintenance of the air filter element.
Because as the dust accumulates, the filtering effect of the new air filter element will gradually improve. Don’t be fooled by the dusty appearance of the air filter element and perform excessive maintenance. You must know that the air filter element should be like this. Through the clogging indicator on the air filter, the user can ensure the maximum filtration efficiency while using the full working life of the filter element.

The second is improper maintenance of the air filter element. In the maintenance process, the delicate engine is easily exposed to dust and damaged. Therefore, engine damage is most likely to occur during improper maintenance.

How to change the oil, fuel filter and water filter products?

When the service life of the oil filter reaches the mileage specified by the OEM, it needs to be replaced forcibly. The following matters need to be paid attention to during the replacement process:

Replacement method:

1. First use a special filter wrench to remove the filter that needs to be replaced

2. Clean the base where the filter is installed, especially to remove the remaining sealing ring impurities on the mounting surface of the base;

3. Fill the new filter with engine oil and apply a little engine oil on the sealing ring

4. Install the filter vertically and install it on the thread of the base. When the upper end surface of the filter seal contacts the mounting surface of the base, turn and tighten 3/4 turn or install according to the specified torque according to the requirements of the main engine factory.

Contact US