High Performance Diesel Marine Fuel Filter R13S R13P R13T with bowl for Parker Racor

Short Description:

Product Detail

Product Tags

Description

Racor R13: R13S, R13T, R13P Diesel Replacement Element
The Racor R13 is a replacement element for the 120B series diesel assembly. The R13 is available in all three micron sizes: 2, 10, and 30 micron. As an assembly, this element is capable of processing up to 20 GPH.

Micron Rating

30-Micron (P Rating) (Red Cap)
10-Micron (T Rating) (Blue Cap)
2-Micron (S Rating) (Brown Cap)

DESCRIPTION: ATTRIBUTE VALUE
PRODUCT TYPE: FILTER FUEL/WATER SEPARATOR
DESCRIPTION: Replacement Fuel Filter/Water Separator
MAXIMUM FLOW RATE: 20 GPH (76 LPH)
FILTER RATING: 10 Micron
PORT/CONNECTION SIZE: M18 X 1.5 Center Thread
ADDITIONAL DETAIL: Used In Model 120B Filter Assembly
TRADE/BRAND NAME: MST

Biodiesel tends to shorten filter life and most biodiesels have a low “interfacial tension” – meaning water easily disperses and dissolves in the fuel, greatly reducing efficiency for all types of water separators and coalescers. Recommends using the largest filter practical for the application to extend filter life and increase efficiency. When specifying a new biodiesel fuel system, de-rate fuel filter flow by 50% and install on the vacuum side of any pumps, where possible.

Biodiesel and Biofuel Filtration Specification Considerations

- Large primary and secondary filters at 50% of their rated flow.

- High-quality, corrosion-resistant materials in construction.

- High-quality, synthetic rubber compounds for seals and hoses.

- Efficient coolant and/or electric heating.

- Fuel source with high-efficiency fuel dispensing.

Biodiesel and other biofuels require extra heat, filtration, and vehicle modifications to burn in diesel engines. Racor fuel filters and heaters are uniquely suited for filtering and conditioning biodiesel and biofuels for use in diesel engines.