Good User Reputation for Lube Oil Filter - Oil filter replacement engine lube filter LF16106 P553161 – MILESTONE
Good User Reputation for Lube Oil Filter - Oil filter replacement engine lube filter LF16106 P553161 – MILESTONE Detail:
Size
Filter type: Lube, Full-Flow Spin-On
Outer diameter 1: 128.5mm
Height 1: 171mm
Thread size: 1 5/8×12
OEM
JOHN DEERE : DZ101884
JOHN DEERE : RE521420
JOHN DEERE : RE521548
FLEETGUARD LF16106 replacement filters
Baldwin B7335-MPG
Baldwin B7335MPG
CARQUEST 84137
Fleetguard LF16106
Fram PH10950
John Deere RE521420
John Deere RE521548
LUBER-FINER LFP5214
NAPA 7137
Wix 57137
There are 10 replacement oil filters for FLEETGUARD LF16106. The cross references are for general reference only, please check for correct specifications and measurements for your application.
How to replace the filter element
Under normal use, if the differential pressure alarm of the pre-filter device alarms or the cumulative use exceeds 300 hours, the filter element should be replaced. The dual-barrel parallel pre-filter device can not shut down when replacing the filter element.
Steps to replace the filter element: 1. Replacement of the filter element of the single barrel pre-filter device: a. Close the oil inlet ball valve and open the upper end cover. (Aluminum alloy type upper end cover needs to be opened gently from the side notch with a flat-blade screwdriver); b. Unscrew the drain plug wire to drain off the dirty oil; c. Loosen the fastening nut on the upper end of the filter element, and the operator wears an oil-proof Hold the filter element tightly with gloves, and remove the old filter element vertically; d. Replace with a new filter element, pad the upper seal ring (the lower end has its own seal), and tighten the nut; f. Pay attention to pad the sealing ring) and tighten the bolts. 2. Replacement of the filter element of the dual-barrel parallel pre-filtration device: a. First close the oil inlet valve of the filter on the side of the filter element that needs to be replaced, close the oil outlet valve after a few minutes, then unscrew the end cover bolts, and open the end cover; b. Open the drain The valve completely drains the dirty oil to prevent the dirty oil from entering the clean oil chamber when the filter element is replaced; c. Loosen the fastening nut on the upper end of the filter element, and the operator wears oil-proof gloves to hold the filter element and remove the old filter element vertically; c. Replace with a new filter element, pad the upper seal ring (the lower end has its own seal), tighten the nut; d. Close the drain valve, cover the upper end cover (pay attention to the seal ring), and install the fastening bolts. E. Open the oil inlet valve first, then open the exhaust valve. When the exhaust valve discharges oil, immediately close the exhaust valve, and then open the oil outlet valve; then operate the filter on the other side in the same way.
Contact us
We just do high quality products with best service!
—————————————————————————————————————————-
Xingtai Milestone Import&Export Trading Co.,LTD
Emma
Tel: + 86-319-5326929
Fax: +86-319-5326929
Cell: +86-13230991525
Whatsapp/wechat: +86-13230991525
Email / Skype: info5@milestonea.com
Website: www.milestonea.com
Address: Xingtai High-tech Development Zone, Hebei . China
Product detail pictures:
Related Product Guide:
With our loaded working experience and thoughtful products and services, we've got been acknowledged as a reputable supplier for most international buyers for Good User Reputation for Lube Oil Filter - Oil filter replacement engine lube filter LF16106 P553161 – MILESTONE , The product will supply to all over the world, such as: Argentina, Venezuela, United Arab Emirates, We have more than 200 staff including experienced managers, creative designers, sophisticated engineers and skilled workers. Through hard work of all employees for the past 20 years own company grew stronger and stronger. We always apply the "client first" principle. We also always fulfill all contracts to the point and therefore enjoy excellent reputation and trust among our customers. You are very welcome to personally visit our company.We hope to start a business partnership on the basis of mutual benefit and successful development . For more information please do no hesitate to contact us..
By Mario from Venezuela - 2017.10.25 15:53
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Athena from Swedish - 2018.06.28 19:27