Fuel water separator 600-311-9121

Short Description:

Send email to us

Product Detail

Product Tags

Size

Inner diameter 2 : 62mm

Height : 175mm

Seal Ring Diameter : 72mm

Recommended Special Tool Part Number : OCS2

Connector Thread : 1″-14UNF-2B

Starting Torque : 20Nm

Shell Diameter : 93.2mm

Filter Implementation Type : Screw-on Filter

OEM

CATERPILLAR : 5A6717

CATERPILLAR : 6L7440

CATERPILLAR : 6N3784

CATERPILLAR : 777261

CATERPILLAR : 7C3638

CATERPILLAR : 8M4776

CATERPILLAR : 9X4402

CATERPILLAR : 9Y4402

CATERPILLAR : 9Y4403

CLARK : 949095

COLES : 8766599

CUMMINS : 154709

CUMMINS : 154710

CUMMINS : 154711

CUMMINS : 154744

CUMMINS : 156171

CUMMINS : 156172

CUMMINS : 202893

CUMMINS : 252811

CUMMINS : 3300901

Cross reference

BALDWIN : BF7558

BALDWIN : BF796

BALDWIN : BF957

BALDWIN : BF957B

BALDWIN : BF957D

BALDWIN : BF970

BALDWIN : BF973

BALDWIN : BF983

BALDWIN : BF991

BOSCH : 0451302001

BOSCH : 0451302054

BOSCH : 1 457 434 180

BOSCH : 1 457 434 423

What should I do if the diesel vehicle fuel filter fault light is on?

The reason why the diesel filter fault light is on is that the filter is blocked or damaged, and a new filter needs to be replaced. The function of the diesel filter is to filter out harmful impurities and moisture in the fuel system, protect the normal operation of the engine, reduce wear, avoid blockage, and improve engine life. The common faults and troubleshooting methods of diesel filters are as follows: 1. When the engine is difficult to start, first check whether there is gas in the filter and pipeline. If so, pump the oil by hand to drain the gas; 2. Second, it may be blocked by the filter There are too many impurities, the filter screen has been blocked, and the pressure is too large, and the new filter components (filter elements) need to be replaced; 3. Oil leaks from the gaskets such as oil pipe joints and bleed screws, and the gaskets need to be replaced. If the hand pump is not oiled, it may be due to poor cleanliness and large particles of impurities, which may cause the impurities to stick to the check valve and cause the check valve to fail, thus causing the pump oil to fail. Remove the hand oil pump and clean all parts; oil, replace the filter.