Fuel filter separate water 2992662 fuel water separator 2992662

Short Description:

Send email to us

Product Detail

Product Tags

Size

Height : 195mm

Inner diameter 2 : 62mm

Seal Ring Diameter : 70mm

Recommended part number of special tool : 15kt

Connector thread: M16x1.5

Starting Torque : 14Nm

Shell Diameter : 96mm

Filter Implementation Type : Screw-on Filter

OEM

CASE IH : 504054011

CASE IH : 8743556

IVECO : 2992662

IVECO : 42540058

IVECO : 500354176

IVECO : 503633384

IVECO : 98132510AS

Cross reference

BALDWIN : BF1365

BOSCH : F 026 402 036

COOPERS : FSM4270

DONALDSON : P550904

DT : 7.24001

DT Spare Parts : 7.24001

FILTRON : PP879/5

FLEETGUARD : FS19821

FRAM : PS10061

HENGST FILTER : H215WK

MAHLE ORIGINAL : KC 214

MANN-FILTER : WK 950/16

MANN-FILTER : WK 950/19

How to drain the truck fuel water separator?

Generally, the fuel water separator of the truck has a special drain valve, which can be drained after the valve is unscrewed. Different models of fuel water separators operate in different ways. It is recommended that riders read the manual carefully. , The following is the relevant introduction: 1. Definition of fuel water separator: The fuel water separator is a necessary device on the truck. The fuel water separator can remove the moisture in the diesel oil, so as to prolong the service life of the fuel injector and the engine. Many trucks have two small white cans on the side of the chassis. This can is the fuel water separator. 2. Check the status of the fuel water separator: It is recommended that truck drivers frequently check the status of the fuel water separator. If the fuel water separator is broken, it should be replaced in time. If the water in the diesel cannot be separated, it will affect the service life of the fuel injector and the service life of the engine. 3. The hazards of poor oil products: The engines of trucks are generally high-pressure common rail diesel engines, which have high requirements on the quality of diesel oil, because the high-pressure injectors need to precisely control the injection pressure, injection time and fuel injection. If there are impurities in the diesel oil or the water is not filtered cleanly, it will cause certain damage to the fuel injector.