Factory wholesale for air compressor filter part to replace 1604132802 1604039380 oil and gas separator filter

Oil and gas separation filter

The oil and gas separator is a device that separates the crude oil produced by the oil well and the associated natural gas. The oil and gas separator is placed between the submersible centrifugal pump and the protector to separate the free gas in the well fluid from the well fluid, the liquid is sent to the submersible centrifugal pump, and the gas is released to the annular space of the tubing and casing.
With the advancement of science and technology, modern enterprises are flourishing, and compressed air is used in almost every industry. The oil and gas separation filter adopts a special multi-layer structure, and the oil-containing air is intercepted by multiple layers of oil absorption layer, coagulation layer and separation layer, and the oil is separated to obtain the required clean air. It is an indispensable filter element for air compressors. The oil and gas separation filter has the characteristics of high filtration accuracy, very little residual flow, and high compressive strength. The oil and gas separation filter is installed in the air compressor to separate and recover the oil particles in the air. Pre-filters are installed in the pipeline to remove solid particles and oil particles to obtain clean air. High efficiency, ultra-high efficiency filters are installed in branch circuits to remove extremely small solid particles and oil particles to obtain very clean air to protect important components.

effect

The oil and gas separation element is the key component that determines the quality of the compressed air of the air compressor. The compressed air from the compressor head entrains large and small oil droplets. Large oil droplets are easy to separate when passing through the oil and gas separation tank, while small oil droplets (suspended oil particles below 1um in diameter) must be filtered through the micron and glass fiber filter material layers of the oil and gas separation filter element. Through the diffusion of the filter material, the oil particles are directly intercepted by the filter material and the mechanisms such as inertial collision agglomeration make the suspended oil particles in the compressed air quickly agglomerate into large oil droplets. The inlet of the oil return pipe in the recess returns to the lubricating oil system of the machine head, so that the compressor discharges purer and oil-free compressed air. When the solid particles in the compressed air pass through the oil separation core, they stay in the filter layer, which leads to the continuous increase of the pressure difference (resistance) of the oil separation core. With the increase in the use time of the oil separator, when the pressure difference of the oil separator reaches 0.08 to 0.1Mpa, the filter element must be replaced, otherwise the operating cost (power consumption) of the compressor will increase.