Mobile Phone
+86-13273665388
Call Us
+86-319+5326929
E-mail
milestone_ceo@163.com

Engine oil filter 35178573 oil filter element 3517857-3

Short Description:


Product Detail

Product Tags

Size

Inner diameter 2 : 62mm

Height : 81mm

Seal Ring Diameter : 72mm

Filter Implementation Type : Screw-on Filter

Opening pressure Bypass valve: 1.2bar

Recommended Special Tool Part Number : OCS 2

Connector Thread : 3/4″-16UNF-2B

Starting Torque : 20Nm

Shell Diameter : 93.2mm

OEM

ATLAS COPCO : 10300882

ATLAS COPCO : 16193558

VOLVO : 1266286

VOLVO : 12662862

VOLVO : 1266388

VOLVO : 3517857

VOLVO : 35178573

VOLVO : 418432

VOLVO : 4184321

Cross reference

BOSCH : 0986452044

BOSCH : 0 986 B01 003

BOSCH : O136

BOSCH : P3219

DONALDSON : P550939

FILTRON : OP568

FLEETGUARD : LF3758

HENGST FILTER : H10W06

HENGST FILTER : H10W22

MANN-FILTER : W917

MANN-FILTER : W920/12

MANN-FILTER : W920/22

What is the right way to check your car’s oil filter?

As we all know, the car oil filter plays a vital role in the engine. Its main function is to filter impurities in the oil and provide clean oil for the operation of various parts of the engine. Next, we will introduce several methods for checking and replacing automobile oil filters:

1. General car manufacturers recommend that the air filter replacement cycle for normal maintenance is 30,000 kilometers, and a routine inspection is carried out every 25,000 kilometers. The recommended replacement interval for conservative maintenance is 25,000 km. The air filter of a normal car should be replaced at 25,000 kilometers. The air filter must be replaced every 25,000 kilometers, and the air filter should be checked at 11,000 kilometers.

2. The first step to do is to open the engine compartment cover and confirm the position of the air conditioner filter element of the car (usually located on the right side of the engine compartment, that is, above the right front wheel, there is a black square plastic box with a thick and thick arm attached to it. soft rubber hose).

3. Lift the entire air filter cover forward and remember the steps when removing it. This is for smooth installation. If anything goes wrong during installation, find out the cause and don’t use violence.

4. The design takes into account the convenience of frequent disassembly and cleaning by the owner. General models do not use screws to fix, and the entire air filter cover can be lifted forward by gently opening the two metal clips backwards.

5. Before reinstalling the car air conditioner filter, make sure that there is no water residue in the air filter element and air intake box.

6. Take out the air filter element and check if there is more dust. Gently tap the end face of the filter element, and use compressed air to blow the dust on the filter element from the inside to the outside. Do not wash with gasoline or water. If the air filter is severely clogged, it needs to be replaced with a new one.

7. Pay attention to fake and inferior oil filter seal gaskets due to poor rubber toughness, easy to age and crack at high temperature, so the oil is easy to pop out at the joint surface of the machine filter and the cylinder block, causing oil leakage, poor engine heat dissipation and other faults, serious Cylinder explosion may even occur.

Contact us

emma名片

We just do high quality products with best service!

—————————————————————————————————————————-

Xingtai Milestone Import&Export Trading Co.,LTD

Emma

Tel: + 86-319-5326929

Fax: +86-319-5326929

Cell: +86-13230991525

Whatsapp/wechat: +86-13230991525

Email / Skype: info5@milestonea.com

Website: www.milestonea.com

Address: Xingtai High-tech Development Zone, Hebei . China


  • Previous:
  • Next:

  • Write your message here and send it to us