EF-092C Cartridge Hydraulic Oil Filter Element  60308100061 For Diesel Engine

When to replace the oil filter

First of all, for the so-called “vehicle blood” engine oil, long-term use will deteriorate. If it is not replaced in time, it will increase the wear of the engine and even cause damage to the components. Therefore, it is recommended that the owner change the oil in time according to the instructions in the owner’s manual. Generally speaking, the oil should be changed every 5000-15000 kilometers.
Since the oil has to pass through the oil filter to reach the lubrication part, the function of the oil filter is to filter the impurities in the oil entering the engine system and prevent impurities (dust, metal chips and oil) from being continuously mixed into the oil during the life cycle. The colloidal substance formed by oxidation) will cause serious consequences such as oil passage blockage and even engine damage. Currently, most cars use disposable filters that cannot be removed and cleaned. Therefore, the oil is generally changed every 5000-15000 kilometers at the same time to ensure the good lubrication effect of the engine oil on the engine.

If the oil filter is replaced regularly, only clean oil will circulate in the system. This will greatly increase the energy output of the engine and reliably prevent wear.

How to replace the truck oil filter: How to replace the truck oil filter?

1. Warm up the engine, open the oil filler cap, lift the vehicle, remove the engine guard plate and unscrew the oil plug, and use the oil reservoir to drain all the old oil in the engine. Spread the engine oil evenly on the rubber ring of the new filter for later use;

2. After the oil is completely drained, install the drain plug, take out the old filter, and then screw the new filter into the filter seat freely by hand;

3. Use a torque wrench to tighten the filter according to the torque in the repair manual. The filter sealing ring is made of special material, please do not use excessive force when tightening, so as to avoid difficulty in disassembly, clean the oil around the filter;

4. Refuel, tighten the fuel cap after refilling, check the oil level, start the engine to idle and accelerate for a period of time, check whether there is oil leakage, and recheck the oil level after stopping for a few minutes. If there is any oil leakage, the replacement is completed.

contact us