China Factory direct supply air filter P124867 high quality for generator Diesel Engine part

Product Size

Outer diameter 1 : 352mm
Height : 540mm
Outer diameter 2 : 352mm
Inner diameter 1 : 241mm
Inner diameter 2 : 23mm
Height 1 : 520.7mm
Net weight: 4.9kg
Internal width : 380mm
Filter Implementation Type : Fresh Air Filter
Weight : 5.592kg
Length Inside : 380mm

OEM reference number

AGCO : AG700282
CATERPILLAR : 3I0193
CATERPILLAR : 9Y6813
FMC: 3A13690
FORD : 9576P124867
JOHN DEERE : RE16808
ONAN : 1401654
VME: 12565177
VME: 4065101
VME: M12565177
VOLVO : 12565177
VOLVO : 125651778
VOLVO: M12565177
ACDelco : A996C
AIR REFINER : ARM124867
ATLAS COPCO : 361322
ATLAS COPCO : 5536132200
ATLAS COPCO : ELM00081
BALDWIN : PA2573
CARQUEST : 87235
COOPERS : AEM2058
Donaldson-AU: P124867
DYNAPAC : 499505
EIMCO : 69029995
EIMCO: 70156N
EUCLID : 12565177
EUCLID : 4065101
EUCLID : E4065101
FLEETGUARD : AF4553M
FLEETGUARD : AH19073
FRAM: CA6327
GPC : FC454
INGERSOLL-RAND : 56938632
INGERSOLL-RAND : 57790917
LUBERFINER : LAF1845
MICHIGAN : 12565177
Motorcraft : FA885
PUROLATOR : 6947547
PUROLATOR : A73226
PUROLATOR : A73226Q
PUROLATOR : AF3226
PUROLATOR : AF3226Q
RYCO : HDA5472
SAKURA : A7945
SANDVIK : 69029995
SULLAIR : 46299
SURE FILTER : SFA4867P
WOODGATE : WGA863

The role and principle of air filtration
The engine needs to suck in a lot of air during the working process. If the air is not filtered, the dust suspended in the air will be sucked into the cylinder, which will accelerate the wear of the piston group and the cylinder. Larger particles entering between the piston and the cylinder will cause serious “pulling the cylinder”, which is especially serious in dry and sandy working environments.
According to the filtration principle, air filters can be divided into filter type, centrifugal type, oil bath type and composite type.
1. During installation, whether flange, rubber pipe or direct connection is used between the air filter and the engine intake pipe, they must be tight and reliable to prevent air leakage. Rubber gaskets must be installed on both ends of the filter element; The wing nut of the cover should not be over-tightened to avoid crushing the paper filter element.
2. During maintenance, the paper filter element must not be cleaned in oil, otherwise the paper filter element will fail, and it is easy to cause a speeding accident. During maintenance, only use the vibration method, the soft brush brushing method (to brush along the wrinkle) or the compressed air blowback method to remove the dust and dirt attached to the surface of the paper filter element. For the coarse filter part, the dust in the dust collecting part, the blades and the cyclone pipe should be removed in time. Even if it can be carefully maintained every time, the paper filter element cannot fully restore its original performance, and its air intake resistance will increase. Therefore, when the paper filter element needs to be maintained for the fourth time, it should be replaced with a new filter element. If the paper filter element is cracked, perforated, or the filter paper and end cap are degummed, they should be replaced immediately.
3. When in use, it is necessary to strictly prevent the paper core air filter from being wet by rain, because once the paper core absorbs a lot of water, it will greatly increase the air intake resistance and shorten the mission. In addition, the paper core air filter must not come into contact with oil and fire.